Gefran

Gefran

About GEFRAN  

APPLICATIONS

  • PLASTIC
  • MOBILE HYDRAULICS
  • HEAT TREATMENT
  • LIFT
  • METAL
  • HOIST AND CRANE
  • WATER
  • HVAC
  • OTHER

 

POSITION SENSORS

Linear and angular position transducers detect the position of mechanical parts in motion. Gefran manufactures a wide and unique range of models, using consolidated and new technologies, including the potentiometric technology, magnetostriction, Hall effect, MEMS, and magnetic dragging.

POTENTIOMETERS

  • LT - With a shaft
  • PC - with cylindrical case
  • PK - Rodless
  • PA1 - With a shaft
  • PY1 - Touch version
  • PY2 - Touch version with ball tip
  • PY3 - Touch version with bearing tip
  • PZ12 - 1/2” cylindrical housing
  • PZ34 - 3/4” cylindrical housing
  • LT67 - With shaft - IP67
  • PC67 - with cylindrical case - IP67
  • PZ67-S - With brackets - IP67
  • PZ67-A - With self-aligning joints - IP67
  • PME - Pneumatic cylinders
  • PMA - with self-aligning joints
  • PMI - Patented - Oledynamic cylinders
  • PMI-SL - Diameter 12.7mm - Oledynamic cylinders
  • PMI-SLE - Analog output - Oledynamic cylinders
  • IC - Oledynamic cylinders
  • PS - Rotary servo mounted
  • PR65 - The sealed industrial version
  • EG01_EG02 - Pulse rotation encoders
  • EG03 - Tachometer
  • PCIR 101-102 - Signal conditioner for linear transducers

MAGNETOSTRICTIVES

  • WPG-A - General Contactless - Magnetostrictive - Aluminum LowProfile - Analogues Outputs
  • WPP-A - Plus Contactless - Magnetostrictive - Aluminum Profile - Analogues Outputs
  • WPA-A - Advanced Contactless - Magnetostrictive - Aluminum Profile - Analogues Outputs
  • WPP-S - Plus Contactless - Magnetostrictive - Aluminum Profile - SSI Digital Output
  • WPA-S - Advanced Contactless - Magnetostrictive - Aluminum Profile - SSI Digital Outputs
  • MK4-C - ONDA Contactless - Magnetostrictive - Aluminum Profile - CAN Open Output
  • MK4-P - ONDA Contactless - Magnetostrictive - Aluminum Profile - PROFIBUS Output
  • WPA-F - Contactless magnetostrictive - HYPERWAVE technology - Profinet Output
  • WPL-A - Contactless - Magnetostrictive - Aluminum Profile - IO-Link Digital Output
  • WRG-A - General Contactless - Magnetostrictive - ROD AISI 316 - Thread - Analogues Outputs
  • WRP-A - Plus Contactless - Magnetostrictive - ROD Thread AISI 316 - Analogues Outputs
  • WRA-A - Advanced Contactless - Magnetostrictive - ROD Thread AISI 316 - Analogues Outputs
  • WRP-S - Plus Contactless - Magnetostrictive - ROD Thread AISI 316 - SSI Digital Output
  • WRA-S - Advanced Contactless - Magnetostrictive - ROD Thread AISI 316 - SSI digital output
  • IK4-C - ONDA Contactless - Magnetostrictive - ROD Thread AISI 316 - CAN Open Output
  • IK4-P - ONDA Contactless - Magnetostrictive - ROD Thread AISI 316 - PROFIBUS Output
  • WRA-F - Contactless magnetostrictive - HYPERWAVE technology - Profinet Output
  • RK-2 - Compact Contactless - Magnetostrictive - ROD Flange AISI 316 - Analogues Outputs
  • RK-4 - Compact Contactless - Magnetostrictive - ROD Thread AISI 316 - Analogues Outputs
  • RK-5 - MH Contactless - Magnetostrictive - ROD Flange AISI 316 - Analogues Outputs
  • RK-5 C - MH Contactless - Magnetostrictive - ROD Flange AISI 316 - CANopen Outputs
  • IK4 - RK2 - RK4 - Accessories on request
  • RK-5 - Accessories on request

ROTARY

  • GRA - Hall-effect single-turn rotary sensor with shaft
  • GRN - Hall-effect single-turn rotary sensor without shaft

INCLINOMETERS

  • GIB - Single/dual axis entry-level tilt sensor (XY/360°)
  • GIG - General single/dual axis inclinometer (XY/360°)
  • GIT - Top single/dual axis inclinometer (XY/360°)

LINEAR BY WIRE

  • GSH - Wire position transducer (hall effect)
  • GSF - Wire position transducer (wire potentiometer)

 

PRESSURE SENSORS

Gefran’s industrial pressure transducers and transmitters measure the pressure of fluids (liquid or gaseous) in the applications required. In particular, Melt pressure transducers are dedicated to applications involving high process temperatures up to 540°C.

INDUSTRIAL

  • KS - Compact size SIL2 Volt or mA outputs
  • TK - General purpose Volt or mA output
  • TKDA - General-purpose Digital Autozero Volt or mA output
  • KH - Compact size SIL2 Mobile Hydraulic Volt or mA outputs
  • KHC - Compact Size Mobile Hydraulic digital CANopen output
  • KX - Intrinsically safe PESO/ATEX/SIL2/PAC/EAC mA output
  • TSA - Low-pressure Relative and Absolute Volt or mA outputs
  • TPH - High pressure > 1000bar mV/V output
  • TPHADA - High pressure > 1000bar Digital Autozero Volt or mA output
  • TPF - Flush Diaphragm Miniaturized diaphragm mV/V output
  • TPFADA - Flush Diaphragm Miniaturized diaphragm Volt or mA output
  • TPFAS - Flush Diaphragm Miniaturized diaphragm Volt or mA output
  • TPS - High accuracy mv/V output
  • TPSA - High accuracy Volt or mA output
  • TPSADA - High accuracy Digital Autozero Volt or mA output
  • TDP-1001 - Local Plug-in Alarms limit the display

MELT - HIGH TEMPERATURE

  • ME SIL2 - Mercury Filled - Output 4...20mA - SIL2
  • M7 SIL2 - Mercury Filled - Voltage Output - SIL2
  • KE SIL2 - NAK Sodium Potassium - Output 4...20mA - SIL2
  • K7 SIL2 - NAK Sodium Potassium - Voltage Output - SIL2
  • WE SIL2 - Diathermic Oil Filled - Output 4...20mA - SIL2
  • W7 SIL2 - Diathermic Oil Filled - Tension Output - SIL2
  • K3 - NAK - Sodium Potassium - mV/V Output
  • CMI - CANOpen module interface for non-amplified transducers
  • ILI - IMPACT Fluid Free - IO-Link digital Output - SIL2 - PLd
  • ILK - NAK - Sodium Potassium - IO-Link Digital Output - SIL2 - PLd
  • ILW - Diathermic Oil - IO-Link Digital Output - SIL2 - PLd
  • ILM - Mercury Filled - IO-Link Digital Output - SIL2 - PLd
  • HIX - IMPACT fluid free - HART - ATEX - IECEx - EAC - PAC - SIL2 - PLd - KCs - Nepsi Ex - PESO
  • HMX - Mercury Filled - HART - ATEX - IECEx - EAC - PAC - SIL2 - PLd - KCs - Nepsi Ex - PESO
  • HWX - Diathermic OIL FDA - HART – ATEX - IECEx - EAC - PAC - SIL2 - PLd - KCs - Nepsi Ex - PESO
  • HWX4 - Diathermic OIL FDA flanged - HART - ATEX - SIL2 - PLd
  • HIE - IMPACT fluid free - HART - SIL2 - PLd
  • HME - Mercury Filled - HART - SIL2 - PLd
  • HWE - Diathermic OIL FDA - HART - SIL2 - PLd
  • HMX4 - Mercury Filled flanged - HART - ATEX - SIL2 - PLd
  • HWF - Oil Filled - HART – FM
  • HMF - Mercury Filled - HART – FM
  • HKE - NAK – Sodium Potassium - HART - SIL2 - PLd
  • ME - Mercury Filled - Output 4…20mA
  • WE - Diathermic OIL FDA - Output 4…20mA
  • KE - NAK – Sodium Potassium - Output 4…20Ma
  • IE PLc - IMPACT Fluid free - Output 4…20mA
  • KE PLc - NAK – Sodium Potassium - Output 4…20mA - PLc
  • WE PLc - Diathermic OIL FDA - Output 4…20mA - PLc
  • ME PLc - Mercury Filled - Output 4…20mA - PLc
  • IX - IMPACT Fluid Free - 4...20mA Output - ATEX
  • KF - Mounting hole drilling kit
  • WX - Diathermic Oil FDA - 4...20mA Output - ATEX
  • MX - Mercury Filled - 4...20mA Output - ATEX
  • IN - IMPACT Fluid Free - Voltage output
  • KN - NAK - Sodium Potassium - Voltage Output
  • WN - Diathermic Oil FDA - Voltage Output
  • MN - Mercury Filled - Voltage Output
  • I7 PLc - IMPACT Fluid Free - Voltage Output - PLc
  • K7 PLc - NAK - Sodium Potassium - Voltage Output - PLc
  • W7 PLc - Diathermic Oil FDA - Voltage output - PLc
  • M7 PLc - Mercury Filled - Voltage Output - PLc
  • I3 - IMPACT Fluid Free - mV/V Output
  • M3 - Mercury Filled - mV/V Output
  • W3 - Diathermic Oil FDA - mV/V Output
  • MX4 - Mercury Filled - 4...20mA Output - ATEX
  • CT - Mounting hole cleaning kit
  • KD - DP404 CAN OPEN digital output
  • WD - DP404 CAN OPEN digital output
  • MD - DP404 CAN OPEN digital output
  • Extension cables - (6-pin / 8-pin)
  • W6 - Diathermic Oil FDA - Digital gauge - Retransmission 4...20mA Output
  • M6 - Mercury Filled - Digital gauge - Retransmission 4...20mA Output
  • TS3 - 3 mV/V transducer simulator
  • GRD - Rupture disks
  • M5 - Mercury Filled - Mechanical gauge
  • W0 - Diatherimic Oil FDA - Pressure control set (1/4 DIN)
  • W7 - Diathermic Oil FDA - Pressure monitoring set (1/8 DIN)
  • W8 - Diathermic Oil FDA - Pressure monitoring set (1/4 DIN)
  • W9 - Diathermic Oil FDA - Pressure monitoring set (1/4 DIN)
  • M0 - Mercury Filled - Pressure control set (1/4 DIN)
  • M7 - Mercury Filled - Pressure monitoring set (1/8 DIN)
  • M8 - Mercury Filled - Pressure monitoring set (1/4 DIN)
  • M9 - Mercury Filled - Pressure and temperature monitoring set (1/4 DIN)

 

STRAIN AND FORCE SENSORS

Force transducers measure compression, tensile, bending, and deformation forces. Geran provides both the traditional version and the exclusive Sensormate models, which rely on the innovative Press On technology, and are ideal for carrying out continuous and temporary measurements.

STRAIN

  • IN-4000 set - Nozzle pressure sensor system
  • VDA-M - Two or three-channel amplifier
  • QE1008-W SET - System for tie bar measurement with wireless transmission
  • SL76-VDA - Strain link sensor with variable digital amplifier
  • SB46 - Press-on-strain sensor without an amplifier
  • SB76-VDA - Press-on sensor with digital amplifier
  • ML1018 - Measuring lance
  • GE1029-A - Tie-bar strain sensor with an amplifier
  • GE1029 - Tie-bar strain sensor
  • AN1068 - Strain ring
  • VDA-I - Variable digital inline amplifier
  • QE1008 - Magnet-mount strain sensor
  • DAK - Nozzle touch force sensor
  • QE1010 - Magnet mount strain sensor
  • QE1008-DU-1D - 1- channel system for tie bar strain measurement with digital monitor
  • QE1008-DU-4D - 4- channel system for tie bar strain mea¬surement with digital monitor
  • QE1008-DU-4USB - 4- channel system for tie bar strain measuring with digital monitor-box
  • GE1029-DU-1D - System for tie-bar measurement with 1 - channel monitor
  • GE1029-DU-4D - System for tie-bar measurement with 4- channel monitor
  • DU-1D - 1- channel digital monitor
  • DU-4D - 4 - channel digital monitor
  • DU-4USB - 4- channel digital monitor-box USB
  • SL76/80-AA/AC - Link sensor with an amplifier
  • SL76/80-AA - Link sensor with analogue amplifier
  • SL76/80-AC - Link sensor with AC amplifier

FORCE

  • CU - Small size load cell
  • TU - Small size load cell
  • SB - Low profile load cell
  • CB - Load cell
  • SH - Standard profile load cell
  • CM - Standard size load cell
  • TC - Standard size load cell
  • TR - Force transducer for measuring spindles tension
  • CIR - Strain gauge transducers
  • CIR-D - Galvanically isolated strain gauge transducers
  • AM - Miniature force transducer
  • TH - Force transducer
  • CC - Cylindrical force transducer
  • DLC - Diaphragm load cell without an amplifier
  • DLCA - Diaphragm load cell with an amplifier
  • CT - Toroidal force transducer

 

TEMPERATURE SENSORS

Temperature sensors must have the least effect possible on the values to be read and Gefran, in its wide range of thermocouples and chemoresistance, meets the measurement needs to be required by the various industrial sectors.

  • THERMOCOUPLES
  • RESISTANCE THERMOMETERS

 

CONTROLLERS AND INDICATORS

Gefran’s range of temperature and process controllers ensure easy and accurate solutions for applications requiring single and multiple PID control loops. Moreover, the range of indicators with alarm thresholds provides a precise and clear view of the main process variables.

  • CONTROLLERS AND PROGRAMMERS
  • INDICATORS AND ALARM UNITS

 

POWER CONTROL

Gefran offers a wide range of static units (SCR) and power controllers for controlling linear and non-linear resistive loads, short-wavelength infrared (SWIR) lamps, and transformers. The connection can be single-phase, two- or three-phase for a current control up to 600 A. Moreover, the connection with the main field buses available on the market is available to facilitate the integration with the factory supervision systems.

  • POWER CONTROLLERS
  • SOLID-STATE RELAYS WITH/WITHOUT HEATSINK
  • FIELDBUS

 

AUTOMATION PLATFORMS

Gefran automation platforms are represented by specific hardware and software proposals constantly updated and upgraded to meet the market’s most challenging requests.

They are the result of the proprietary know-how, which is based on the collaboration with OEMs and system integrators.

  • PANEL PC - CPU
  • REMOTE I/OS
  • HMI TERMINALS
  • PLCS IN RACKS
  • INTEGRATED DEVELOPMENT ENVIRONMENTS
  • TEMPLATES
  • CONNECTIVITY 4.0
  • ACCESSORIES

 

DRIVES

Gefran Drives for AC and DC motors control and the “energy-saving” solutions are applied in the most advanced industrial and domestic automation systems.

 “Standard” and “Application-oriented” product ranges combine outstanding performance with great flexibility of use and specific functions for high-end drives applications.

INVERTERS FOR INDUSTRIAL APPLICATIONS

  • ADV200 - Field-Oriented vector inverter
  • ADV200 LC - Liquid-cooled field-oriented vector inverter
  • BDI50 - Compact v/f & sensorless inverter
  • VDI100 - General purpose full vector inverter
  • VDI100 - General purpose full vector inverter
  • ADV200 HC - Field-Oriented vector inverter for Hoist & Crane applications
  • ADV200 WA - Field-Oriented vector inverter for water treatment and HVAC
  • ADV200 SP - Inverter for solar water pumps
  • ADP200 - inverter for servo pump applications

INVERTERS FOR ELEVATORS

  • ADL300 - Lift Field oriented vector inverter for synchronous/asynchronous motors
  • VDL200 - Lift-field-oriented vector inverter for asynchronous motors
  • ICS-ADL300 - Integrated solution for elevators
  • AGL50 – EV - Lift Space Vector inverter
  • AFE200 - Regenerative active front end power suppliers
  • ADL500 - Lift Field oriented vector inverter for synchronous/asynchronous motors

DC DRIVES

  • TPD32 EV - Armature DC converters
  • TPD32 EV-FC - Field regulators
  • TPD32 EV-CU - Regulation control unit for universal external power bridge
  • TPD32 EV-12P/12S - 12-pulse DC armature converters

MOTORS

  • SBM Series - Brushless servomotors
  • KFM 05A - Asynchronous motor with frequency inverter

REGEN AND AC/DC POWER SUPPLIES

  • AFE200 - Regenerative active front end power suppliers
  • FFE200 - Regenerative fundamental front end power suppliers
  • SMB200 - AC/DC power suppliers
  • SM32 - AC/DC power suppliers

SPECIAL CONFIGURATIONS

  • ADV200-EH - Field-oriented vector inverter with IP54 external heatsink
  • ADV200-E54 - Field-oriented vector inverter with IP54 enclosure
  • ADV200 System - Turnkey cabinet solutions

 

SERVO DRIVES AND MOTORS

Gefran’s modular servo drives offer top-level performance for the control of brushless motors used in multi-axis production lines which require great precision and rapid operating sequences.

The wide range of permanent magnet servomotors also represents the best combination for high dynamic industrial applications.

  • SERVODRIVES
  • MOTORS
  • INTEGRATED MOTORS

 

 

We can't find products matching the selection.